One of the foremost noted attributes of hydrogen peroxide is the power to remove skin spots. Many women use it to clear their armpits or eliminate a spot by whatever may have damaged the tone of their skin.
Here, we’ll show you different ways to use hydrogen peroxide. They’re all very easy and very effective.
Hydrogen peroxide is a product that must be available in every house. It is used to disinfect wounds, but also because of its bleaching properties.
In this article, we’ll show you 6 steps how to use hydrogen peroxide to clarify and eliminate skin spots with a really simple method.
1 – Eliminate skin spots
The key element in this treatment is hydrogen peroxide of 20%. We use this type normally to disinfect wounds, so you must have it at your home. It contains a low concentration of hydrogen peroxide. If the percentage of hydrogen peroxide is higher, it may be too harmful.
2 – Perform a test of sensibility
Before you start, you must make sure that the whole process will be safe for your skin. There are people who may have allergic reactions to hydrogen peroxide or they have a very sensitive skin. They can even experience small burns. That’s why you must be sure before you start.
First, you have to know which areas you want to clean. If they are on your body, apply some hydrogen peroxide on your forearm and wait to see how your skin reacts. If the zone you should clean is on your face, you can apply the drop behind the ear.
If you start noticing itching, annoyance or pain, rinse the area rapidly with lots of lukewarm water and do not continue! If your skin doesn’t show any of the symptoms, continue with the following step.
3 – Clean the area
Wash the zone that you want to clean well. Use lukewarm water and neutral soap to clean the zone and dry it with a towel. Pat dry, but never rub.
4 – Remove dead cells
Exfoliation is ideal to clean the dead cells of your skin. There are products for that, but we recommend you to do it in a natural way, with ingredients that you can already find at your home. Simply take a spoonful of sugar, two tablespoons of natural yoghurt and one teaspoon of oats.
Mix well the ingredients and apply it on the area that you want to clean. Use small circular movements for about 30 seconds. After that, rinse with some lukewarm water. Do not press too much as it can cause some skin wounds.
5 – Whiten your skin
Take a cotton ball and soak it into hydrogen peroxide. Apply it directly on the area or dark zone with small pats and press it slightly.
You have already exfoliated your skin, so don’t press too much with the piece of cotton as you can damage the surface cells.
If the spot is more than 5 cm, adds additional water to the cotton ball and continues with the process for several minutes.
6 – Rest And Withdraw
Let the hydrogen peroxide act for 15 minutes without covering the zone. Leave it to penetrate and act on your skin. Then, rinse with plenty of lukewarm water and pat dry with a towel. Never press the zone too much! Dry the skin without rubbing.
You might see a slightly red zone after you have finished, but it is a completely normal reaction. If you notice itching, burning or pain in any moment, stop the process and clean the zone with water.
Apply some quality cream after you have dried your skin.
Source: beextrahealthynow
0 comments
Post a Comment